| Overall Press Length: | Ninety-six inches (96") |
| Overall Press Width: | Forty inches (40") |
| Width With Handle: | Forty-nine inches (49") |
| Overall Press Height: | Fifty-eight inches (58") |
| Overall Press Weight: | One thousand six hundred pounds (1,600 lbs.) |
| Bed Length: | Sixty inches (60") |
| Bed Width: | Thirty-two and one-half inches (32-1/2") |
| Bed Height: | Thirty-two inches (32") |
| Bed Thickness: | Two and one-half inch cherry wood (2-1/2") |
| Bed Construction: | The press bed is 2-1/2" cherry hardwood, flatness tolerance of less than five-thousands (5/1000) of an inch; surface of press bed is covered with 1/8" neoprene rubber; 1/16" thick galvanized steel covers the entire press bed, six 4" wide steel strips are screwed to the lower surface to provide a contact surface to the main drum. |
| Drum Diameter: | Four and one-half inches (4-1/2") |
| Drum Length: | Thirty-nine inches (39") |
| Drum: | Mounted with two self-aligning ball bearings. |
| Frame: | Construction of frame is 2" x 4" x 3/16" all steel rectangular tubing. |
| Pressure: | The pressure system allows a printing range from 1/2" to 4-1/8". This pressure system is a double lobed concentric cam with grease fittings in all moving parts. |
| Drive System: | The drive system consists of a one to seven (1 to 7) chain reduction for ease of cranking, a spring loaded clutch and a stop-lock system for the press bed. The ease of hand cranking under any pressure is obtained by our superior gear reduction system that is enclosed in a custom cast aluminum gear guard. |
| Finish: | We use an automotive type of finish that is a three step process which consists of special cleansers, special primers and a special paint called Imron, a Dupont product. This paint, a two-part polyurethane which ensures a durable hard finish, is used by manufacturers of custom automobile and airplane bodies. We go through this labor intensive process to ensure that you have a unique custom quality finish that will endure for years and years. Other exposed metal parts are either polished aluminum or polished bronze. |
| Specifications: | Specifications are subject to change without prior notice. |
| Warranty: | Ten (10) year warranty. |
Frequently Asked Questions | Price Sheet | Guarantee